Turbelle® nanostream® 6055 is an electronic speed controlled pump operating on safety extra-low voltage. It is ideal in every aquarium from 40 to 500 litres (10.5 to 132 USgal.) enabling wave or low and high tide simulation, operating on a new micro-processor controlled motor; it can thus be referred to as an "intelligent pump":

The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about fifty per cent lower than in conventional pump motors. The pump will be stopped immediately in case of blockage. After the blockage has been removed, the pump will start up automatically after a delay of 20 seconds.

The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill. The pump can be controlled with Multicontroller 7095, 7096 as well as Singlecontroller 7091, and comes complete with power supply unit and magnet holder.

To view a video of the Tunze Turbelle Stream range, click on the link below (a new window will open taking you to the Tunze website):

for aquariums from 40 to 500 litres
(11 to 132 USgal.).
Flow rate: 1,000 to 5,500 l/h
(264 to 1,453 USgal./h).
Energy consumption: 4 - 18 W.
Voltage / frequency: 100 - 240 V / 50 - 60 Hz.
Cable length: 5 m (196.8 in.).
Dimensions: diam. 70 mm (2.7 in.).
Output: diam. 40/15 mm (1.5 / .59 in.).